Category類別Trade-Mark牌號Equivalent to China Standard相當國標Characteristics & application特性和用途Equivalent to AWS相當AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模Cast iron鑄鐵Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊ENiCu-BCopper alloys銅合金Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用ECuAl-A2Aluminum alloys鋁合金Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.純鋁，耐蝕性好，但強度不高，純鋁焊接用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.鋁錳，強度高，耐蝕。鋁合金焊接用E3003Nickel alloys鎳合金Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.純鎳，用于鎳、鎳與鋼的焊接與堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊ENiCu-7Category類別Trademark牌號Chemical composition主要成份(%)Characteristics & application特性和用途Equivalent to AWS相當AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭ECoCr-CCopperalloys銅合金S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.機械性能好，抗裂性好。紫銅氣焊及氬弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.機械性能好，銅合金氬弧焊及鋼的MIG釬焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨性好。銅合金氬弧焊及鋼的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨性好。銅合金氬弧焊及鋼的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊劑的S221焊絲S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊劑的S222焊絲RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.熔點約900℃。銅、鋼、鑄鐵釬焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵Copperalloys銅合金S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊劑的S225焊絲RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用Aluminum alloys鋁合金S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.塑性好、耐蝕。純鋁氣焊、氬弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蝕，強度高。鋁合金氬弧焊用ER5183斯米克釬焊料分別有：（銅鋅釬焊料），（銅磷銀基釬焊料），（鋁基釬焊料），（錫鉛釬焊料），（鎳基釬焊料).簡介如下：Category類別Trade-mark牌號Specification規格MeltingPoint熔點(℃)Chemicalcomposition主要成份(%)Application用途Equivalentto AWS相當AWSCopperzinc銅鋅L103Wire & rod絲885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.釬焊銅、青銅和鋼等受力不大工件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.釬焊硬質合金刀具Copperphosphorus銅磷L201Cast rod, wire & rod, powder鑄條、絲、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金BCuP-2L204Cast rod, wire鑄條、絲640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.釬焊銅及銅合金、銀、鉬等金屬。BCuP-5L205Cast rod, wire & rod, powder鑄條、絲、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金BCuP-3L207Cast rod, wire & rod鑄條、絲640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金BCuP-7L209Cast rod, wire鑄條、絲684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金。BCuP-6 Silverbase銀基L302Wire & rod絲745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等L303Wire & rod絲660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-5L303FFlux coated rod涂藥絲660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂釬劑的L303，用途與L303相同BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.釬焊銅及銅合金、鋼等BAg-6L308Wire & rod絲779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.銅和鎳的真空或還原保護氣氛釬焊BAg-8L312Wire & rod絲595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等L313Wire & rod絲625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-1aL321Wire & rod絲615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-7L323Wire & rod絲665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等L325Wire & rod絲645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-36L326Wire & rod絲650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-34Aluminum base鋁基L400Cast rod, wire & rod鑄條、絲577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.鋁及鋁合金的釬焊BAlSi-4L401Cast rod鑄條525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.鋁及鋁合金的釬焊Tin lead錫鉛L600Wire & rod絲183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔金屬及熱處理件的釬焊60SnL601Wire & rod絲183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.銅及銅合金、鍍鋅鐵皮的釬焊。18SnL602Wire & rod絲183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.銅、黃銅、鐵、鍍鋅鐵皮的釬焊30SnL603Wire & rod絲183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.銅及銅合金、鋼、鋅制零件的釬焊40SnL604Wire & rod絲183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.食品、醫療所需銅、鋼等金屬的釬焊90SnL605Wire & rod絲232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.電器、食品所需銅、鋼等金屬的釬焊L608Wire & rod絲295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.銅及銅合金、鋼及不銹鋼的釬焊Nickel base鎳基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不銹鋼真空或保護氣氛釬焊BNi-2Category類別Trade-mark牌號Product name名稱Characteristics & application特性和用途Gaswelding氣焊CJ301Copper gas welding flux銅氣焊熔劑Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.熔點約650℃，銅及銅合金氣焊或釬焊的助熔劑CJ401Aluminum gas welding flux鋁氣焊熔劑Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.熔點約560℃，鋁及鋁合金氣焊的助熔劑Silverbrazing銀釬焊QJ101Silver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑QJ102Silver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑QJ102ASilver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊QJ112Silver brazing paste flux膏狀銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑QJ103Silver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑Aluminum brazing鋁釬焊QJ201Aluminum brazing flux鋁釬焊熔劑Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃范圍釬焊鋁及鋁合金的助熔劑QJ207Aluminum brazing flux鋁釬焊熔劑Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃范圍釬焊鋁及鋁合金的助熔劑Category類別Trade-mark牌號Chemicalcomposition化學成份(%)Hardness硬度Application用途 Oxy-AcetyleneFlamespray-using氧乙炔焰噴焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.鑄鐵件的噴焊，如玻璃模具，汽缸、導軌F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐磨、耐蝕件的噴焊，如閥門、泵轉子、泵柱塞F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐磨件的噴焊，如軸類、汽門F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐磨、耐蝕、抗高溫氧化工件的噴焊，如模具、柱塞F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐磨件的噴焊，如軸類、冷模具F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨粒磨損場合的噴焊，如導板、刮板、風機葉片F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗強烈磨粒磨損，無需加工場合的噴焊，如挖泥船耙齒F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.農機,礦山機械易損件的噴焊，如齒輪，車軸Track iron powder軌鐵粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.鐵路鋼軌擦傷、低塌等缺陷的修復噴焊Oxy-acetylene flame spraying氧乙炔焰噴涂F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.軸承、切削件等的噴涂F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.噴涂亦可噴焊，如滾筒、柱塞、耐蝕耐磨軸等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.造紙烘缸、軸類的噴涂F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.軸類噴涂F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.軸、軸承的噴涂F512復合Al5Ni95Backing spray of transition layer between base and working layer.噴涂層的基體與工作層之間過渡（打底）層用噴涂PTAhardfacing等離子弧噴焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.高溫高壓閥門密封面、熱剪切刃口的等離子噴焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.高溫下耐磨耐蝕件的噴焊，如高溫高壓閥門、鼓風機F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中溫中壓閥門的閘板及其他耐磨件的等離子噴焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中溫中壓閥門的閥座及其他耐磨件的等離子噴焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.軸、軸承等離子噴焊
